Skip to main content

When a pressure release reaches beyond the exclusion zone


An incident shared by Safer Together gives supervisors and crews a specific question to take into the pre-start.

During a hydraulic fracturing operation, a threaded connection failed on a pressure-relief valve assembly at the frac manifold. The valve and attached vent line separated and were thrown clear. A buffer zone was in place, yet parts of the valve came to rest beyond it. Safer Together’s Learning Event Bulletin gives teams a case to discuss before comparable work.

The detail worth discussing is where the equipment ended up. A boundary drawn around the work area describes where people should be kept clear. The way a component might move if a connection fails depends on the actual layout and the way energy can be released. A useful question at a pre-start is, “If that component comes free, who or what could be in its path?” It gives the people who installed the equipment, the people running the job and the supervisor a common point to discuss.

The same question can expose a problem during a change of plan. A vehicle that was out of the way earlier may now be parked in a different position. A contractor arriving partway through the job may have been briefed on an earlier arrangement. The supervisor needs to know who is responsible for reassessing the change and how the revised controls will reach everyone affected.

AWCC’s flange-joint course focuses on making and breaking bolted flange joints. The bulletin concerns a threaded connection, and the course is relevant to teams working with a different type of pressure boundary. Frontline Leadership gives supervisors a place to practise the conversations that bring concerns into the open, and AWCC’s Well Intervention course addresses role-specific pressure-control knowledge.

Explore flange-joint training · See Frontline Leadership Training · View Well Intervention Pressure Control Safer Together Learning Event Bulletin · Incident summary hosted by Step Change in Safety